The Perforce™ Timer brings a host of new features never before incorporated into a wildlife feeder timer. Control your feeder using the Wi-Fi capability of your iOS or Android smartphone. No cellular service is required to operate it. Once installed, the Perforce Timer creates a local Wi-Fi network at your feeder. Simply connect to it when in range in order to manually feed, adjust feed times, or check your battery and panel.
The Perforce Timer installs into existing feeder lower control units with minimal modifications. Purchase a timer, 5W or larger solar panel, solar panel mounting kit from our web store and you can be up and running. Program the motor output for your existing 12V or 6V motor and gain the capability to adjust the motor speed.
Missed out on a big seasoned Buck or Boar because you left some scent behind while placing some extra corn under your feeder? Losing remotes? Tired of replacing blown fuses? Feeder throwing corn a little too far? Want to run your LED feeder light off the battery without risk of over discharging it? No longer an issue!
Have an existing LED feeder light? Connect it to the accessory power output of the Perforce Timer and you can remotely turn the light on and off. In addition, you can setup up an on and off time, utilize the solar panel as a light sensor and have the light run from dusk until dawn or leave power on all the time and let the light manage itself. Enable the low battery monitor to prevent your LED feeder light from damaging your battery due to over-discharge and leave enough charge to ensure your feeder always feeds the next morning.
Perforce Timer was designed building on over a decade of experience in designing high reliability electronic equipment that operates in some of the harshest climates on the planet.
We try our very best to support American jobs whenever possible. Our products are designed in the USA. Final assembly of the Perforce Timer occurs in the USA using parts sourced both domestically and internationally. Many companies cannot claim that!
Get the Perforce Timer App :
Apple devices require iOS 11 or newer. Android devices require Android 5.0 or newer. Older devices can still connect using any web browser.
Perforce Timer Includes:
Wiring Terminal Block
2-Pin Motor Connector
1 Year Warranty
Perforce Timer Requires (NOT Included):
12V, Lead-Acid Battery ≥ 7 Amp-hours
12V, Solar Panel ≥ 5 Watts (Can be purchased in our store along with a mounting kit here)
The latest installation instructions can be found here.
Below are pictures of feeders with the Perforce Timer, Solar Panels, and Solar Panel Mounts provided by us